If you have an outdated window, really don’t throw it away, just preserve it for this cute vintage-inspired cabinet. Besides it you’ll require (two) 1×10 @6ft frequent board, (1) 1×10 @10ft frequent board, (1) 1×12 @6ft widespread board, (five) 1×4 @6ft typical board, one/four inch 4′ x 8′ sanded plywood, two inch finishing screws, mid-grade hinges, a knob, wood filler, paint. Measure the distance from the bottom or leading of the door to the muntin (the strip of wood in between every window pane). The ideal way to make this measurement correct is to lay the door flat on the ground and area 1 1×10 board that is going to be a single of the sides of the shelf up coming to the door. Maintain reading through the guidelines at craftsmandrive.com.