British designer Kris Lamba has folded a twenty-metre-extended piece of carbon fibre into a chair that facilitates different sitting positions .

RV1 Carbon Chair by Kris Lamba

The RV1 Carbon Chair has big indents in its kind on the prime and bottom, making it achievable to switch between the two different seating positions by flipping the design over.

RV1 Carbon Chair by Kris Lamba

The chair is produced from carbon fibre and resin, and is accessible with a white or tinted black substantial-gloss all-natural-carbon finish.


Related story: Thomas Feichtner sculpts chair from carbon-fibre sheets


Its form was inspired by a visit to a wind tunnel, the place the designer watched a jet being tested.

RV1 Carbon Chair by Kris Lamba

“I tried to visualise a chair that flowed harmoniously into the background atmosphere,” Lamba told Dezeen. “This led to the continuous form.”

RV1 Carbon Chair by Kris Lamba

A wish for the chair to be barely visible from a side profile led to the material option of carbon fibre, due to its high strength-to-fat ratio.

“It also allowed ergonomic flex even though preserving structural integrity,” added the designer. “Tension points were calculated digitally and allow the chair to flex lightly based on the seating position selected.”

RV1 Carbon Chair by Kris Lamba

Lamba claims that the chair is the “world’s initial one-piece multi-position chair,” explaining that it is produced utilizing “a pioneering infusion process designed particularly for the purpose”.

The process commences with wrapping carbon fibre all around a good mould of the chair and inserting into an airtight bag so it can be positioned into a vacuum.

RV1 Carbon Chair by Kris Lamba

Resin is drawn into the type through a network of pipes and a honeycomb surface layer. The entire issue is then heat-cured and launched from the mould.

“1 of the principal challenges of the steady form is that only male moulds can be utilised, hence rendering classic resin-infusion approaches ineffective,” stated the designer. The piece is sanded and trimmed ahead of the outer colour is utilized.

RV1 Carbon Chair by Kris Lamba

Other 1-piece chairs that provide a single seating place contain Jasper Morrison’s 1999 injection-moulded polypropylene Air-Chair for Magis Ronen Kadushin’s Hack Chair produced of a single sheet of metal and Patrick Jouin’s Strong C2 – the first item of furniture to be 3D-printed in a single piece.


Relevant articles: see much more carbon-fibre style


According to Lamba, the RV1 attributes both a “social, ergonomic and upright” place and a “reclined, relaxed” place suited to longer seating intervals.

RV1 Carbon Chair by Kris Lamba

“I was visualising a contemporary environment, which would call for multiple seating positions but would require to maintain a extremely basic aesthetic,” explained the designer, who has also developed a limited-edition stainless steel version of the chair.

RV1 Carbon Chair by Kris Lamba The constrained-edition stainless edition of the chair

Carbon fibre has been used to produce a number of chairs, which includes a circular coloured seat and a design and style composed of thin interlinked strands. Marcel Wanders has also produced an ultra-lightweight carbon fibre chair formed close to party balloons.

Dezeen

LEAVE A REPLY

Please enter your comment!
Please enter your name here