10 diy ikea rast hacks you should have a look at cover

Manufactured of reliable wood, which is a hardwearing and warm natural material, IKEA Rast chest of drawers is ideal for plenty of modern ambiences and will appear natural in each of them, especially if you hack it a tiny bit. Wanna uncover out how to do that? Let’s have a seem at some tips.

DIY Painting And Shifting Hardware

Painting and altering handles is the most well-liked notion. Stain it with a stain colour of your option. If you want to seal it you can with a polyurethane. Add some new hardware. Voila! This is a standard transformation for IKEA Rast.

DIY Industrial  IKEA Rast Hack

Wanna spruce it in industrial style a bit? Trim the top of the sides down to be degree with the prime of the dresser and puttied the holes. Soon after the putty was dry sand it down with 120 grit sandpaper. Subsequent prime the nightstand using an oil based mostly primer and paint it the colour you like. Consider round metal items and amazing square metal trim and minimize almost everything to dimension and weld it with each other. Weld bolts onto the back of the overlays to attach them to the Rast drawers. Following the paint is dry, drill holes into the front of the drawers to attach the metal overlays.

Secure these on the inside of the drawer with a nut. Cut and stain a piece of wood to be the new best of the nightstand. Use a hammer to distress the wood a bit just before you stain it. Then glue it down to the leading of the nightstand, use a nail gun to safe it in location and include a couple of clamps to help hold it down nicely right up until the glue dries totally. Then paint 6″ hairpin legs a hammered metal colour to assist match our metal overlay and allow people dry. The final phase is attaching hardware and voila!

DIY IKEA Rast Glam Hack

Wanna turn your Rast into a great and chic glam piece? Prime the surface of the dresser and spray it with two coats of black lacquer spray paint. Making use of the blown-up photographs, trace the motifs onto tracing paper, lower the stencil with an Xacto knife. Use gold paint to decorate on the motif, going in excess of it freehand to fill in the gaps from the stencil. Finally, include sophisticated bronze ring pulls.

Want far more DIY hacks for this piece? Have a look at them under!

Nightstand hack with stain and white paint

Nightstand hack with stain and white paint (by means of shelterness)

LEAVE A REPLY

Please enter your comment!
Please enter your name here